Safety Data Sheet
1. PRODUCT
1.1 Product identifiers
Name: 2-Hydroxyethyl cellulose CAS-No.: 9004-62-0
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances
2. HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture
Not a hazardous substance or mixture.
2.2 GHS Label elements, including precautionary statements
Not a hazardous substance or mixture.
2.3 Hazards not otherwise classified (HNOC) or not covered by GHS
No data available
3. COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Substances
CAS-No.: 9004-62-0
No components need to be disclosed according to the applicable regulations. For the full text of the H-Statements mentioned in this Section, see Section 16.
4. FIRST AID MEASURES
4.1 Description of first aid measures
|
General advice |
|
No data available |
|
If inhaled |
|
If breathed in, move person into fresh air. If not breathing, give artificial respiration. |
|
In case of skin contact |
|
Wash off with soap and plenty of water. |
|
In case of eye contact |
|
Flush eyes with water as a precaution. |
|
If swallowed |
|
Never give anything by mouth to an unconscious person. Rinse mouth with water. |
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
4.2 Indication of any immediate medical attention and special treatment needed
no data available
5. FIREFIGHTING MEASURES
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Advice for firefighters
Wear self contained breathing apparatus for firefighting if necessary.
5.4 Further information
no data available
6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas. For personal protection see section 8.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
7. HANDLING AND STORAGE
7.1 Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place. Hygroscopic. Moisture sensitive. Keep in a dry place.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control parameters
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
8.2 Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). |
|
Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Full contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0.11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. |
|
Body Protection |
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. |
|
Respiratory protection |
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). |
|
Control of environmen tal exposure |
Do not let product enter drains. |
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
|
Appearance |
Form: powder Colour: beige |
|
Odour |
no data available |
|
Odour Threshold |
no data available |
|
pH |
no data available |
|
Melting point/freezing point |
Melting point/range: 288 - 290 °C (550 - 554 °F) |
|
Initial boiling point and boiling range |
no data available |
|
Flash point |
no data available |
|
Evaporation rate |
no data available |
|
Flammability (solid, gas) |
no data available |
|
Upper/lower flammability or explosive limits |
no data available |
|
Vapour pressure |
no data available |
|
Vapour density |
no data available |
|
Relative density |
0.6 g/mL at 25 °C (77 °F) |
|
Water solubility |
no data available |
|
Partition coefficient: n-octanol/water |
no data available |
|
Auto-ignition temperature |
no data available |
|
Decomposition temperature |
no data available |
|
Viscosity |
no data available |
|
Explosive properties |
no data available |
|
Oxidizing properties |
no data available |
9.2 Other safety information
no data available
10. STABILITY AND REACTIVITY
10.1 Reactivity
no data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
no data available
10.4 Conditions to avoid
no data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Other decomposition products - no data available In the event of fire: see section 5
11. TOXICOLOGICAL INFORMATION
11.1 Information on toxicological effects
|
Acute toxicity |
|
no data available Inhalation: no data available Dermal: no data available no data available |
|
Skin corrosion/irritation |
|
no data available |
|
Serious eye damage/eye irritation |
|
no data available |
|
Respiratory or skin sensitisation |
|
no data available |
|
Germ cell mutagenicity |
|
no data available |
|
Carcinogenicity |
|
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH. NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA. |
|
Reproductive toxicity |
|
no data available no data available |
|
Specific target organ toxicity -single exposure |
|
no data available |
|
Specific target organ toxicity -repeated exposure |
|
no data available |
|
Aspiration hazard |
|
no data available |
|
Additional Information |
|
RTECS: Not available |
12. ECOLOGICAL INFORMATION
12.1 Toxicity
no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
12.6 Other adverse effects
no data available
13. DISPOSAL CONSIDERATIONS
13.1 Waste treatment methods
|
Product |
|
Offer surplus and non-recyclable solutions to a licensed disposal company. |
|
Contaminated packaging |
|
Dispose of as unused product. |
14. TRANSPORT INFORMATION
DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods
15. REGULATORY INFORMATION
SARA 302 Components
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards
No SARA Hazards
Massachusetts Right To Know Components
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components
|
Component |
CAS-No. |
Revision Date |
|
Cellulose, 2-hydroxyethyl ether |
9004-62-0 |
New Jersey Right To Know Components
|
Component |
CAS-No. |
Revision Date |
|
Cellulose, 2-hydroxyethyl ether |
9004-62-0 |
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
16. OTHER INFORMATION
HMIS Rating
- Health hazard: 0
- Chronic Health Hazard:
- Flammability: 0
- Physical Hazard 0
NFPA Rating
- Health hazard: 0
- Fire Hazard: 0
- Reactivity Hazard: 0
Our Products
Hot Tags: Cellulose-HEC, China Cellulose-HEC manufacturers, suppliers, factory, Acetic Acid Tow, High quality Filter Acetate Tow, 3 0y30000 Acetate Tow, 99 9 mercury Liquid, acetate tow, 8 0Y15000 acetate tow